Products - Side Entering

Side entering mixers are used for blending, storage and off-bottom solid suspension applications. They are commonly used in major industries such as petroleum, crude oil, gasoline, chemical, edible oil, asphalt and paper mills. Because of their low initial cost and easy installation, side entering mixers are often preferred for large tanks where mixing is easily accomplished or for large storage tank applications.

MODEL HV

Rugged & Versatile - The MixMor Model HV is an all-welded construction, "V" belt drive mixer which is extensively used in food, chemical, asphalt and other processing industries. Its heavy duty construction assures long life with minimum maintenance.
Horsepower Range: 1 to 60
Output Speeds: 420 or 280 rpm
Reduction Type: ‘V’ Belt Drive

Standard Components – Contributing to the success of the Model HV is the fact that many of its components, such as motors, ‘V’ belts, bearings and sheaves are commercially available and can be purchased locally.

Impellers – Mixing applications have different process requirements and that is why MixMor uses a variety of impeller types. Square or Hi-Pitch propellers and three or four-bladed FloMor high efficiency foil impellers are utilized to suit the process.

Seals – Mixers can be furnished with single or double mechanical seals or conventional stuffing boxes with quenching, flushing or water jacket options.

MODEL HG

Dependable & Proven - The MixMor Model HG is a rugged gear-driven side entering mixer which will provide years of continuous trouble-free service while efficiently handling a wide range of applications.
Horsepower Range: 1 to 60
Output Speeds: 420 or 280 rpm
Reduction Type: Spiral Bevel Gear

Frame – The frame is an all-welded fabricated steel assembly guaranteeing accurate alignment of all components. The gear reducer and shaft bearing have rabbet fits to insure ease of maintenance and concentric running shafts.

Gear Reducers – All reducers are heavy duty spiral bevel. This drive is designed and manufactured specifically for mixer application. All housings are cast iron. Lubrication oil in the housing reservoir is automatically directed by splash to bearings and gears. It is manufactured to AGMA standards and conservatively applied to assure and an extended life.

Impellers – Mixing applications have different process requirements and that is why MixMor uses a variety of impeller types. Square or Hi-Pitch propellers and three or four-bladed FloMor high efficiency foil impellers are utilized to suit the process.

Seals – Mixers can be furnished with single or double mechanical seals or conventional stuffing boxes with quenching, flushing or water jacket options.

MODEL HFG

Efficient & Compact - The MixMor Model HFG occupies a minimum of space utilizing a single reduction helical reducer. Maintenance free gear reducer is lubricated for life.
Horsepower Range: 1 to 5
Output Speeds: 420, 350 or 280 rpm
Reduction Type: Helical Gear

Gear Reducers – All reducers have helical gears with aluminum housings. Lubricated for life reducers are manufactured to AGMA standards with conservative service factors to assure years of trouble free service.

Impellers – Mixing applications have different process requirements and that is why MixMor uses a variety of impeller types. Square or Hi-Pitch propellers and three or four-bladed FloMor high efficiency foil impellers are utilized to suit the process.

Seals – Mixers can be furnished with single or double mechanical seals or conventional stuffing boxes with quenching, flushing or water jacket options.

Other Products:
Portable Mixers | Turbine Mixers | Top Entering | Laboratory Mixers
Custom Mixers | Custom Impellers
Mixer Lift Stands

Main Page | Sales Reps | Overview | Inquiry Data Sheet | E-mail