The type of mixer recommended for your application is dependent upon the process requirements. Direct drive mixers are designed for low viscosity or small volume applications or applications requiring high shear. Gear drive mixers are effectively used on higher viscosity products or larger volume applications. Ranging from 1/4 to 5 horsepower, with seven standard speeds and a complete impeller selection, MixMor has the optimum mixer, including All Stainless Steel and USDA Accepted models, for your application .

 

Direct Drive

MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.

MixMor heavy duty direct drive mixers use standard NEMA C face motors mounted on aluminum drive housings. The housing encloses a double sealed ball bearing, with a lower lip seal for additional protection, to provide outboard support for the quill shaft which is subject to stresses from the mixer shaft. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum mixer shaft angle.

Model D
 Model DA

 

Gear Drive

MixMor heavy duty gear drive mixers use standard NEMA C face motors mounted on aluminum gear drive housings. Housings enclose helical gears with a double sealed ball bearing with upper and lower seals for or additional protection. Reducers are grease lubricated for life. Mixer mounts with a heavy duty brass clamp with handwheels for fastening, thus eliminating the need for special tools or wrenches. The clamp and drive housing have a ball and socket assembly to allow 360° rotation on the horizontal plane and 100° on the vertical plane for optimum shaft angle.

 

  

 

  Model G
  

 

 

  Model GA
  

 

***Features & Benefits***


Motors – Standard, commercially available, NEMA C face motors in all enclosures and power requirements, also available with air motors.

Variable Speed Drives – Available with Inverter, AC variable frequency or AccumixÒ SCR/DC drives in NEMA 1 or 4 enclosures.

Housings – Aluminum alloy housings with heavy duty, corrosion resistant brass clamps. Available in stainless steel or other alloys.

Gear Reducer – Helical gears with high service factors and lifetime lubrication.

Impeller Speeds – Direct Drive… 1150, 1750 or 3450 rpm. Gear Drive… 230, 290, 350 or 420 rpm.

Impeller Selection -

  • FloMorÔ High Efficiency Hydrofoils, Three, Four and Wide Blade Designs

  • Square and Hi-Pitch Propellers

  • Pitched Blade Turbines, Three and Four Blade Designs

  • ShearMorÔ Disperser Disks, Hi-Flow and Hi-Shear

  • Folding and Custom Impellers

Mountings – Clamp or Cup Base
-
Options – 
     · USDA Accepted models
     · Stainless steel motors
     · Sanitary finishes
· Coated shaft and impellers
· All stainless steel mixers
· Shaft and impellers in other alloys

 

USDA Accepted Portable Mixers

MixMor currently carries 26 USDA Accepted Portable Mixers for applications within the food, dairy, pharmaceutical and other industries that require sanitary features. Incorporated into the MixMor design is the highest quality of stainless steel and electroless nickel finishes ensuring that MixMor mixers comply with the most stringent USDA government requirements. MixMor mixers can be designed with any combination of the features listed and other features to meet your individual requirements.

 

Standard Features

  • Nickel Plated Air Motors

  • Paint-Free Washdown Duty Electric Motors

  • Stainless Steel Clamp Assemblies

  • Food Grade Lubricants

  • Stainless Steel Fasteners

  • Crevice-Free Housings

  • Stainless Steel Quill Shafts

  • Sanitary Finish on Shafts & Impellers

  • Impellers Welded to Shafts

 

        

 

Other Products:
Turbine Mixers | Top Entering | Side Entering | Laboratory Mixers
Custom Mixers | Custom Impellers
Mixer Lift Stands

Main Page | Sales Reps | Overview | Inquiry Data Sheet | E-mail


3131 Casitas Avenue, Los Angeles, CA 90039
Tel: (323) 664-1941      Fax: (323) 660-5677
© 2002 - MixMor